Wednesday, 13 December 2017

How to Remove Paint from Brick

The original and the basic look of the brick are restored by removing the paint from it. And this is basically not a speedy task. Paint is sinking in all of the grooves as we all know that brick is actually porous. It is extremely awkward and difficult to scrap it like the wood. The solution for the inside walls are gel masonry plus Chemical strippers. Stripping of the bricks is actually not difficult and complicated. Numerous applications of the strippers and loads of scrubbing are involved in it. That’s why it is actually a time-consuming process.

Following is the method of how to remove paint from brick.


Procedure:

How to remove paint from brick using white vinegar.

Material Required:

•    Drop cloths or plastic sheeting
•    
Duct or painter's tape
•    
Masonry paint stripper
•    
Paintbrush
•    
Safety goggles
•    
Face mask
•    
Work gloves
•    
Ladder
•  
 Rags
•    
Spray bottle
•    
White Vinegar

1

Plastic sheeting or the heavy drop cloths are used in order to cover and shelter the floor. Edges or corners of the wall are secured by using painter's tape or duct.

2

Firstly, you need to spot test the reaction of the brick to the chemical, for this a paint brush is used with the help of which the masonry paint stripper is applied to a small part of the end of the wall. The stripper needs to be specific and precise to the brick instead of concrete. If the spot test gives you the negative and adverse response, for instance the crumbling of the brick. Then, you need to use additional compound that helps you to protect the wall of brick from harm and damage.

3

You need to put on the work gloves, face mask and the safety goggles that help you to avoid your contact with the fumes and the chemicals of stripper. A small container or the bucket is taken and a small amount of masonry paint stripper is poured down in it and original container is resealed. Then, the stepladder is positioned at one of the wall’s corners and climb up carefully.

4

A brush is used and the masonry paint stripper is brushed generously on the whole wall of the brick. You need to begin from one corner and you need to work from downward and outward. The stepladder is then repositioned in order to work on the wall’s top, then, go to the next segment till the whole brick is covered and concealed in the stripper.

5

Now, wait according to the time that is specified and defined by the creator. Now, again start from the wall’s top and a stiff-bristled brush is taken and masonry paint stripper is scrubbed off. Paint is going to come off in flakes and chunks. The complete wall is scrubbed with the help of the brush and removes the paint as much as you can.

6

Warm water and the rags are used in order to wash the wall of the brick and this is to eradicate the stripping compound plus the clinging paint. Now, let it to air dry.

7

An additional coating of masonry paint stripper is applied in order to eradicate the stubborn paint. Permit it to stay there on the brick plus you need to scrub it once more. This step is repeated for a number of times in order to remove the paint off the brick wall as much as you can.

8

The stripped wall of the brick is sprayed with the help of the white vinegar. A clean brush is used with the help of which any of the paint remaining is scrubbed off. And then, water is used to rinse it.


Tuesday, 5 December 2017

How to Clean Wood Furniture


Wood furniture is extremely incredible, durable, attractive and beautiful, but on the other hand, it is vulnerable, disposed of and exposed to the dents, scratches and dirt. Take a look at how to clean wood furniture with vinegar and oil. Fortunately, minor and slight dents, marks, dirt, grime and scratches are easily fixed at the house. You can cover up all the imperfections and the flaws with the help of the items that are present in your house.

Following is the procedure of how to clean wood furniture.



Procedure:

How to clean wood furniture using vinegar

Material Required:

•    Dilute white vinegar
•    Water
•    A clean cloth


Steps to clean wood furniture using vinegar

Step: No: 1

Diluted white vinegar is mixed with the water. Three tablespoons of the vinegar are mixed with one cup of the water.

Step: No: 2

Spot test any of the hidden area of the wood furniture. The solution is spot tested on any of the beneath parts of the wood furniture that is not easy to see. A cloth is damped with the prepared mixture, in this way the cloth is moist and not dripping. Some quantity of the prepared mixture is applied to the test area and after this buff it dries by means of a clean cloth. The cleaning procedure is preceded on the whole piece if there is no negative and adverse effect on the spot test area.

Step: No: 3

A cloth is wet by means of the prepared mixture. For this a clean and a soft rag or even a cheese cloth piece is used. The prepared solution is sprayed on the rag or the cloth is dipped in the solution. Always ensure that the cloth is totally wrung out in this way it is not going to excessively saturated. Extra liquid is going to penetrate and enter the wood and will cause harm and damage. So, furniture should not be directly sprayed.

Step: No: 4

The furniture is rubbed by means of the moistened cloth. Circular motions are made. The grains are rubbed in order to eradicate the marks of water. The cloth is rinsed or another clean cloth is taken when you observe that it is becoming clearly and visibly dirty.

Step: No: 5

Additional or the extra moisture is buffed out. The wood is buffed in the circular motions with the help of the clean cloth. And if still there is any spot remaining, then, the cleaning solution is used in it and buffs it again. Always ensure that the moisture is buffed away as the final step.

Monday, 6 November 2017

How to Distress Your Own Furniture Using Vinegar

No preparing, no sanding. Only a tiny bit of exertion can change a consistently household item to French Country. Guests may think you've quite recently been on a shopping trek to France! This is the second in an arrangement on adding French energy to your home.


French Country furniture regularly has an upset look — like it's been around the animal dwelling place a couple times. On the off chance that you need to include a touch of French energy to your home, why not trouble a piece you effectively possess? Or, then again one that you just purchased at a carport deal and not certain of what to do with it? This strategy is super-simple.

Evacuate any equipment.


Clean piece with a soggy cloth.

Utilizing chalk-sort paint, paint the piece no less than 2 coats, enabling the paint to dry between coats. Take after the producer's guidelines on the can for drying time. piece must be fully
dry before distressing.

Fill a splash bottle (subsequent to testing it in the first place, to check it has an even shower) with white vinegar and water, utilizing a 1:1 proportion for vinegar to water.

Splash blend onto piece. Utilizing a white cloth, wipe off the blend utilizing shifted weight so that a few zones have more paint evacuated. Keep wiping and splashing as required.

You might need to paint the equipment independently; lay equipment on a white surface, for example, a cloth.

After piece has dried, apply wax to seal the chalk paint. Wax isn't required constantly, however your piece will wear better in the event that you do.

Much the same as denim, wood furniture looks better when it's a little beat up. Tragically however, furniture stores know this, and matured timber stylistic layout is no place close as reasonable as its well used look may recommend. Nonetheless, there's a snappy trap that you can do yourself to change any old household item into the MVP of your shabby chic-themed home.

Here's the tip: After tidying off and wiping down the household item with a spotless, moist cloth, paint it the shade of your decision. White and pastel shades are drifting on the home style scene, yet pick whatever shade you need.

After the paint has dried—you'll most likely need to do a few coats, contingent upon the murkiness of the piece and the nature of the paint—fill a shower bottle with vinegar (either refined white vinegar or apple juice will work) and a dash of water, and splash the painted wood. Utilizing a perfect, white cloth, rub the wood to evacuate a portion of the paint and make a well-used look. Some DIY bloggers additionally prescribe utilizing steel fleece to wear away the paint, contingent upon how upset you need the completed item to be. At that point, voila: A crisply matured household item.

Home Improvement